Clip Vs. Magazine: What Is The Difference?

Clip Vs. Magazine

As a gun owner, you know the importance of public perception in our politically charged culture.

Unfortunately, when gun enthusiasts consistently use the wrong terms to describe guns and ammunition, it can negatively affect the public’s understanding of guns. One such common misunderstanding is clip vs. magazine.

Aside from others’ perspectives, we should have a desire as gun advocates to understand the weapons we speak about.

Instead, we not only make ourselves look bad when using the wrong terms, but we feed misinformation to those around us.

The NRA Firearms Sourcebook is a great place to seek answers to your terminology questions. Still, we tip our hats to you for taking the time to read this article and ensure clarity on the terminology of clip vs. magazine.

Why It Pays to Get Terminology Right

On an episode of the famous sitcom Cheers, Sam and the guys took Dr. Frasier Crane on a snipe hunt. Frasier was depressed, and the guys did not want him ruining their fishing trip, so they offered to take him hunting for snipe.

Unfortunately, they never defined the term. What is a snipe? Frasier ended up holding a gunny sack, waiting to scoop an animal that did not exist. There is no such thing as a snipe.

Some folks talk about clips that simply do not exist on a particular semi-automatic pistol, and they either do not know better or simply find it unimportant.

However, the guys clearly did not take Frasier seriously when he was left in the woods holding a snipe sack. Likewise, firearm dealers, gun enthusiasts, and even friends are not going to take you seriously or find you at all credible.

It can also lead to a lot of general confusion in conversations when you speak about a clip and your listener is picturing a magazine and wondering why the discussion makes no sense.

Understanding the difference in the clip vs. magazine arena will increase your credibility among gun peers and save you from embarrassing situations. It will also ensure you are describing exactly what you intend to describe.

Clip Vs. Magazine: What’s The Difference?

A magazine is part of a gun that holds the ammunition as it is fed to the chamber of the firearm. A clip holds the ammunition together within the magazine or as it is being fed directly into a gun.

In simple terms, you might say the clip prepares the ammunition for the magazine, and the magazine prepares the ammunition for the gun chamber. Yet within that simple example, there are many types of clips and magazines.

Understanding Clips

An ammunition clip is a device used to store individual rounds of ammunition as a single unit. A clip is inserted into the magazine of a gun or fed directly into other types of guns.

Once the clip is loaded into the magazine, the ammo can be fed individually into the firing chamber. Some who understand this concept make a separate mistake by confusing clips with ammo belts.

A slightly dated pop culture example would be when John Rambo, played by Sylvester Stallone, had multiple ammo belts draped over his shoulders as he fired his automatic weapon.

Ammo belts are not clips. A better example of clips would be a nail gun. The strips of nails come connected by a wire or similar structure that can be fed into the nail gun. This is analogous to a clip.

Ammo Belts

Ammunition belts are used when the sheer volume of shots is essential. Like a clip, ammo belts feed cartridges into a firearm, often an automatic weapon such as a machine gun.

When you picture Rambo with the belts draped over his shoulders, you can understand one essential function of an ammo belt, distributing the weight of a large supply of ammunition.

The capacity of ammo belts can be up to 300 rounds. So, in the terminology of clip vs. magazine, the ammo belt is neither, though often mistaken for both.

Stripper Clips

If a weapon has an internal magazine, the clip can load the bullets directly into the gun. If it has a detachable magazine, the clip can be loaded directly into the magazine.

Stripper clips are probably the most common clip. These clips hold ammunition on a strip of metal. Of all the clip types they are the most similar to the nail gun analogy.

Stripper clips are inserted into a magazine, and as they enter the magazine, the wiring is stripped from the rounds, hence the name stripper clips.

En Bloc Clips

En Bloc clips do not detach the rounds from the clip as stripper clips do. The entire En Bloc clip is inserted into the magazine. These are typically used in older weapons that have internal magazines.

From the internal magazine, the rounds are pushed into the chamber. En Bloc clips were prominent in World War II and the Korean War and can be seen in many war movies.

Moon Clips

Moon clips, either full moon or half-moon, are circular clips that hold rounds in place for a revolver cylinder. Revolvers are one of the most traditional guns with a barrel-like cylinder that revolves in order to line individual bullets with the barrel.

Single-action revolvers are old-fashion revolvers that require a manual cock with each shot. They can still be purchased today, but they are more nostalgic than practical. Modern revolvers are double-action guns.

When you shoot a double-action revolver, the trigger cocks and releases the hammer in the same pull.

This is a slight caveat in our idea that the clip prepares the ammunition for the magazine because revolver cylinders are technically not magazines.

But the idea is the same. Serving the revolver cylinder, a full moon clip holds six rounds, and a half-moon clip holds three rounds.

Understanding Magazines

With the prevalence of modern pistols, clips are becoming less common. Modern pistols are usually semi-automatic weapons with many features.

A magazine is housed inside the gun’s grip. The magazine holds cartridges, and the capacity of the magazine varies depending on its size and other factors.

A pistol is operated by a slide that engages the gun. Within the slide is a single barrel that holds one bullet at a time.

The shooter loads his rounds into the magazine and inserts the magazine into the pistol until it clicks into place. By pulling back on the slide, the first round is chambered.

The gun is now ready to fire. When the first round is fired, the first cartridge is expelled, and the second cartridge is automatically chambered. You can fire repeatedly until the magazine is empty.

Like many of the Korean War rifles, some magazines are internal. Others, like many handguns, are detachable.

Box Magazines

The most common magazine is the box magazine. A box magazine can be internal or detachable, but it functions the same way, regardless.

Internal box magazines are found in bolt action rifles and similar older weapons. It is built into the gun and not meant for removal.

They must be loaded from the top of the gun. While they can be loaded one at a time, clips make the process much more practical.

A detachable box magazine is preloaded before being inserted into your weapon. These are found on many common rifles today, such as the AR-15 and AK-47. They are portable and make gun loading very fast and efficient.

Tubular Magazines

Tubular magazines feed rounds into the chamber using a tube and spring. They are commonly found on .22 rifles and shotguns.

Often located underneath the barrel, the tubular magazine relies on the action of the chamber to spring consistent load rounds.

STANAG Magazines

STANAG magazines were conceived by NATO. The idea was that a common set of standards could be followed by member countries to ensure NATO allies could share ammunition.

The Standardization Agreement (STANAG) applied to various military weapons. STANAG was never officially accepted by all member nations, but manufacturers still fabricate magazines built to STANAG standards.

There is a lot of variation between manufacturers regarding materials used, magazine length, and other specifications.

As a result, quality differs, and the definition of “STANAG compatible” remains cloudy, much like people’s understanding of clip vs. magazine.

Conclusion on Clip vs. Magazine

If you want to have a meaningful conversation about guns and ammunition, take the time to identify your terms. This includes using the proper term and often ensuring that your audience understands the terms you’re using, such as clip vs. magazine.

If you use the wrong terms, you can confuse an uninformed audience. If you use the correct terms, they may still be misunderstood by an uninformed audience.

So be sure to use the correct terms, and when needed, be sure your listeners agree with their meaning. Most importantly, if you do not know what something means, ask!

You probably do not need to be told that because you have taken the time read this article and help your understanding of clip vs. magazine. Finally, be sure to ask questions as a listener.

You can afford a speaker the utmost respect and still humbly seek clarification to be sure you are talking about the same thing. It is the only place to start if you want to have a meaningful conversation on guns.

Leave a Reply

Your email address will not be published. Required fields are marked *